2 Cannot load the unit testing library (test_man.dll)
3 Cannot get the procedure address for unit testing (invoke_test)
4 Read more...
5 Rule Name
6 Description
7 Cannot publish the configuration (generic error)
8 Cannot contact the Agnitum Publisher Service to publish the configuration.
9 Configuration was succesfully published.
10 Please enter a non-empty name.
11 Please enter a non-empty rule name.
12 Inbound
13 Outbound
14 Block It
15 Allow It
16 Report It
17 Mark this rule as High Priority
18 Ignore Component Control
19 %s
20 Where %s
21 Do not log this activity
22 Where the protocol is
23 The selected group contains %d application(s). Do you want to delete it anyway?
25 If you received a registration code from <COMPANY> or its authorized reseller, please enter the code here EXACTLY as it appears in the instructions.
26 Enter Code
27 Warning!\nAll entered networks will be replaced by networks detected on localhost.\n\nDo you want to continue?
28 Warning!\nThe specified path is not an application filename, but a directory on the localhost. The client firewall cannot create rules for a directory.\n\nDo you want to add rules for the process with the same name as this local directory?
29 Allowing rule for localhost UDP activity not found. Some network applications will function with low performance on client computers without that rule.\n\nDo you want to add this rule?
30 Activate Stateful Inspection
31 (trial version)
32 The registration code you entered cannot be saved to the registry.
50 &Publish...
51 &Import...
52 &Export...
53 TCP
54 UDP
55 IP
56 TCP
57 UDP
58 Expired
59 n/a
60 &Help
72 Rule Name
73 Rule Description
74 Rule Category
75 Rule ID
76 Local Address is
77 Local Port is
78 Local Port is
79 Remote Address is
80 remote port is
81 remote port is
82 ICMP Types
83 IP protocol type is
84 direction is
85 Actions
86 Extended flags
87 local port is equal to remote port
88 no selected plug-in
89 Edit Rule
90 New Rule
100 General
101 Application Rules
102 Process Control
103 Global Rules
104 ICMP Settings
105 LAN Settings
106 Plug-Ins
107 Log Cleanup
108 Password
109 License
110 Advanced
111 Application Rules
316 Port
317 Name
318 Description
319 and
329 In
330 Out
350 Lower boundary of the port range cannot exceed the upper boundary.
354 Ports not specified.
355 Specified port alias not found: "%s".
356 The port number or range is not specified.
357 Port number must be in the range from 0 to 65535.
360 This port has already been specified.
361 This port range has already been specified.
388 No column header selected.
395 Example: www.domain.com
396 Example: 192.168.1.0 - 255.255.255.0
397 Example: 195.168.1.0
403 Cannot resolve domain name.
404 General
405 - Settings
406 The license you have entered is valid, but free updates period has expired.
407 Unknown error
408 Client Configuration Editor
409 Echo Reply
410 Destination Unreachable
411 Source Quench
412 Redirect
413 Echo Request
414 Time Exceeded for a Datagram
415 Parameter Problem on a Datagram
416 Timestamp Request
417 Timestamp Reply
418 Address Mask Request
419 Address Mask Reply
420 Please specify regestry path.
421 Specify Network Access Level#Specify the network access level for the applications of this group.
422 Create Custom Rules#Create access rules for the applications of this group.
423 Add new group wizard (Look to text here).
424 Specify Application Executable#Type in or browse to the application executable file.
425 Specify Application Matching Criterion#Specify a matching criterion for identifying the application on the client computer.
426 Specify Application Additional Rights#Specify whether this application should be allowed to perform some extra activity.
600 Do you want to reset ICMP settings to defaults?
602 TCP Ports
603 UDP Ports
604 Allow
605 Block
606 Inbound
607 Outbound
608 from
609 to
610 for
611 Unexpected format encountered while looking for the application (%s).
612 Invalid application specified (%s).
613 Invalid file format (%s).
614 Invalid rule state value specified (%s).
615 Invalid rule name.
616 Invalid Protocol value specified (%s).
617 Invalid Direction value specified (%s).
618 Cannot add rule %s because it is incomplete.
619 Protocol is not specified so the port cannot be selected.
620 Invalid Port value specified (%s).
621 Invalid Host address specified (%s).
622 Client Configuration Editor
623 Invalid IP protocol type specified (%s).
624 Protocol is not specified (%s).
625 %d errors more.
626 The number of application presets is too large. Cannot import more than 1000 application presets.
627 Configuration files|*.conf||
628 Configuration files|*.conf||
629 Cannot export the configuration.
630 Cannot import the configuration.
631 Rules for Application Already Exist
632 Rules for group "%s" already exist. Select whether you want to merge the rules, replace the existing rules with the imported ones from the preset file, or leave the existing rules intact.
633 Global rule "%s" already exists. Select whether you want to merge the rules, replace the existing rule with the imported one from the preset file, or leave the existing rule intact.
634 Global Rule Already Exists
635 Apply to all groups
636 Apply to all global rules
800 Please enter database size in MB in range %d-%d.
801 Please enter number of records in range %d-%d.
802 Please enter days in range %d-%d.
803 Error
804 Warning
805 The password is empty.
806 The passwords do not match.
807 No settings selected.
810 Network
811 Area
812 NetBIOS
813 Trusted
814 Local
815 Internet
816 Enable log
817 Disabled\nNormal\nMaximum
818 Allow access\nBlock access\nPrompt
819 Programs|*.exe|All files|*.*||
820 Preset files|*.lst|All files|*.*||
850 Inbound and Outbound
900 Name
901 Type
902 In
903 Out
904 Custom
905 Trusted
906 Blocked
1000 Plug-In Name
1001 Enable
1002 Select
2002 You have insufficient rights to work with this application.
2003 Please register.
2004 Your license will expire in %d days. To renew, use the Renew License button on the License tab.
2005 Your license has expired. To renew, use the Renew License button on the License tab.
2006 Your trial period will expire in %d days.
2007 Your trial period has expired.
10012 Undefined
10013 Undefined
10014 Undefined
10015 Undefined
10016 do nothing
10017 You entered an invalid subnet mask. The subnet mask must be contiguous. Please enter a valid mask.
10018 Cannot get plug-in properties.
63026 The information that you have entered is either incomplete or invalid. Please re-enter your details.
63028 Thank you for registering!
63150 The key you have entered is invalid.
63151 Error
63152 The key you have entered has expired.
63153 http://www.agnitum.com/purchase/renew.html
63154 The settings were modified.\nClick Publish to publish the configuration or Close to cancel the changes.
63155 The changes you have made will not be saved. Would you like to close the editor?
63156 Modify Rules
63157 Enter license key...
63158 Change license key...
63159 License is not valid.
63160 Step 3 - Select Rule for %s
63161 Step 1 - Specify Application Executable
63162 Step 2 - Specify Application Matching Criterion for %s
63164 Step 2 - Specify Application Matching Criterion for %s
63165 Step 4 - Create Custom Rules for %s
63166 Step 3 - Specify Additional Rights for %s
63174 Inappropriate license type.
63175 There are unspecified parameters in the rule.
63176 TCP protocol direction is not specified.
63177 IP protocol type is not specified.
63178 Invalid value for IP address
63179 Can't parse IP address
63200 No custom rules were added.
63201 Process
63202 Rule
63203 <PRODUCT> is running on the console and the specified settings will be applied to the console as well. If the Block Most mode will be applied to this computer and no allowing rules for the Command Center tools are created, console will not be able to control other user workstations. To avoid this situation, you can create the allowing rules for the Command Center tools.
63204 <PRODUCT> is running on the console and the specified settings will be applied to the console as well. If the Block All mode will be applied to this computer, console will not be able to control other user workstations. To avoid this situation, you can change the mode to Block Most and create the allowing rules for the Command Center tools.\nDo you want to change the mode to Block Most and create the allowing rules?
63205 Modify the rules, policy, and other options for the specified executable
63206 Waiting for module
63207 Wrong module
63208 Duplicate module id. Title %s, id: %s
63209 Duplicate Rule Droup ID. Title %s, id: %s
63210 Duplicate RuleID. Title %s, id: %s, group: %s
